1.Before starting work, you must carefully check whether the fasteners of the equipment are locked, whether the safety protection devices are in good condition, and check them frequently during the work to prevent them from loosening due to severe vibration and causing accidents.
2. Turn on the oil pump and ensure that the oil line is unobstructed.
3. After the equipment is adjusted, first pull the flywheel to check whether the work of each mechanism is normal, and then start the motor only after removing the wrench used for the wrench.
4. All faults should be eliminated before starting, and short-term empty-time rotation should be carried out before test upsetting.
5. In the operation of the equipment, the operator should stand in a safe position, and it is strictly forbidden to pick up the workpiece at the concave and convex die, and can only view the product at the lower end.
6. When replacing the product, the mold and punch must be carefully adjusted, and the parts must be carefully checked to see if they are normal.
7. In the production process, if there is a failure, it must be stopped immediately, the cause must be identified, and the hidden danger must be eliminated.
