1. Keep it clean
The multi-station cold heading machine will inhale a lot of dust and metal chips when working, and if they are not cleaned in time, they will contaminate the parts and rubber sleeves, affecting the molding quality and efficiency. Therefore, it is necessary to keep the cold heading machine clean.
2. Lubrication and maintenance
Multi-station cold heading machine needs to be lubricated with lubricating oil, so it is necessary to add lubricating oil regularly, and check whether the corresponding lubrication point has sufficient lubricating oil when working.
3. Routine inspection of equipment
It is necessary to carry out a routine inspection of the working surface of the transfer cold heading machine, especially whether the welded part and the processed part are damaged, whether the gap between the torsion spring and the housing is appropriate, etc.
4. Check the transmission system
Check whether the transmission system of the multi-station cold heading machine is normal, whether the slider, manipulator, bracket, frame and other parts are loose and whether there is deformation.
5. Pay attention to the circuit equipment
Because the multi-station cold heading machine is driven by an electric motor, it is necessary to pay attention to whether the circuit connection is loose, whether the wire is aging, whether the fuse is suitable and other issues.
6. Check the size and process of the processed workpiece
When the multi-station cold heading machine is processed, it is necessary to frequently check whether the size of the workpiece meets the design requirements, and at the same time, it is necessary to check whether the processing process is objective and reasonable.
7. Prevent frequent wear and damage to parts
The presence of frequent wear and tear and damage to machine components often leads to reduced work efficiency and even personal safety hazards.
8. Do a good job of routine oil leakage inspection
The lubricating oil of the multi-station cold heading machine is easy to cause oil leakage and other situations during operation, so it is necessary to do a good job in routine oil leakage inspection, repair and replace it in time.
9. Ensure working hours and maintenance time
In order not to affect the normal use of the machine, it is necessary to arrange the regular maintenance time of the cold heading machine so that it can be maintained and maintained.
