1. The operator must be proficient in the operation process in the above order, otherwise it may cause machine failure.
2. During the working process of the machine, you should pay attention to whether the sound of the machine is normal, whether the temperature is normal, whether the packaging film is used up, and whether the material is used up. During the production process, the operator should not leave the packaging machine, and should stop the machine for inspection in time if any problems are found.
3. When adjusting each mechanism, be sure to remember the original size and position, so that the adjustment is not ideal to restore to the original starting point.
4. The run-in of the new machine must run at a slow speed for 100-150 hours.
5. Do not put tools and foreign objects on the machine to prevent them from falling into the mold and damaging the mold.
6. When the work is suspended, the sealing mold must be disconnected by jogging.
7. After working for a long time, the surface of the mold should be cleaned with a special copper brush, which is conducive to the quality of sealing.
8. It is strictly forbidden to put hands or items close to the active parts during the operation of the machine.
9. Regularly check whether the fastening parts of the machine are loose or disconnected.
10. The reducer should be replaced with oil (36#) once every 3 months, and the center line of the oil standard shall prevail each time.
